Netgear SC101 Storage Central

If you're looking for network-attached storage (NAS) but have been put off by the high price per gigabyte, Netgear's SC101 Storage Central may just be what you're looking for.

Netgear SC101 Storage Central An unpopulated box (no hard drives) with two easy-access plain ATA drive bays, the SC101 has SAN-like drive-spanning and volume-sharing features. And if you shop carefully for hard drives, the completed drive can be considerably cheaper than the prepopulated competition, such as the Buffalo TeraStation or the Iomega NAS 200d. For features and price per gigabyte, you'll have a hard time beating it.

Setting up the Netgear SC101 Storage Central is easy, though it might be a bit daunting for anyone who doesn't like to open up electronics devices. The first step is to install a hard drive into each of the SC101's two bays; you'll need two if you want RAID mirroring (data stored simultaneously to two drives for redundancy), but you can use just one as well. The front panel of the SC101 has a low-profile latch that is opened with a coin, sort of like a ceramic piggy bank. Open the latch, remove the front panel, and slide the ATA drives in sideways. You must jumper the drives as Cable Select (CS), attach the power connectors and the short IDE ribbon cables, then latch the unit back up. If you need help, the SC101 ships with an excellent setup sheet and user guide.

After you attach the power cord and run an Ethernet cable to your router, you'll need to install the Storage Central Management Utility software from the included CD on each computer you wish to have access to the SC101. The Netgear SC101 isn't accessed via an IP address like many NAS boxes, but the software is easy to use and guides you nicely through the drive configuration process. However, less technically inclined readers should go over the manual first, and everyone should have a plan for how to divvy up the storage space. The SC101 allows you to divide the storage space, as well as share it among individual users. For example, you can assign part of the SC101's total storage capacity to your upstairs computer for private use, assign another part to the computer in the home office, then share part of it across all of the machines in the house for multimedia use, file transfer, and so on. There's no power switch on the mini-toaster-size unit, so home users might want to hook it up to a power strip or another switchable power source for shutdown during nonaccess hours.

Once you're through assigning volumes, you'll see those parts of the SC101's storage that are visible to each machine as a normal drive letter, not a mapped network drive, as with many Web administrated NAS boxes. The SC101 also has a feature normally found only in storage-area networks (SANs): the ability to create volumes that span multiple SC101s. If you add another SC101 Storage Central unit, you can access them separately or allocate space from both units as if they were a single volume. Alas, though Netgear told us that it's developing Mac and Linux drivers, for now, the SC101 is for Windows XP, 2000, and 2003 Server machines only. For backup for users who don't already have a favourite backup program, Netgear bundles the box with Storage Sync Pro.

Because the Netgear SC101 Storage Central ships without drives and its performance depends heavily on the drives you choose, we're not inclined to make a big deal out of the SC101's lackluster performance in our informal tests. However, with the single Western Digital Caviar WD800 hard drive that Netgear provided for testing, the SC101 was the slowest home NAS box we've seen to date at writing a 400MB folder of mixed file types as well as a 1.9GB single image file to its platters (in nonmirrored mode, using a shared partition). The SC101 was more competitive reading data back to our test bed, besting both Western Digital's NetCenter and Buffalo's TeraStation by small margins with the 400MB folder, though it was still the slowest we've tested with the 1.9GB image file. Still, the SC101's low price and features make it a compelling option in the field of network storage.

The Netgear SC101 Storage Central comes with a one-year warranty. The company's Web site has a helpful user forum for presales and post-free-period support problems, as well as firmware upgrades and a PDF version of the user manual. You can also send e-mail to tech support from the Web site.

SC101 Storage Central
Company: Netgear
Price: AU$229

Advertisement

Talkback 15 comments

    Netgear SC101 Anonymous -- 05/11/05

    This unit sounded great on paper but has not fulfilled the potential. I set it up with 3 partitions mirrored over 2 physical drives. 6 days later 2 of the mirrors had broken (which means recreating the partition and mirrors and finding room for the files somewhere else). The final mirrored partition broke about 2 weeks later. There are problems finding the partitions when this happens and sometimes they are visible on one system but not another. Performance is not great but I could live with that if it was reliable. Failsafe this unit is not. Support has also left alot to be desired, as I am still waiting for answers some 4 weeks later. I am now operating with 6 partitions and manually backing it up. I just don't trust the mirroring to keep my data safe. Also I was under the impression that a true SAN would allow the logical drive (partition) to be spanned across the physical drives so that to the user you could only see one "drive". However, that doesn't seem to be possible here. Lastly (and this could be a windows error) it seems impossible to assign a fixed drive letter to each partition created so that you can set definite paths up for other programs. Everytime I try it gradually breaks down after 1 or more restarts of the computer. Overall I would have to say don't buy this unless you are prepared to spend alot of time mucking around with it. I also have problems with a Netgear W624 router and bigpond...

    Netrgear SC101 Anonymous -- 01/08/06 (in reply to #120122863)

    Mine has been running for a month on a dlink router with 2 wireless PC's and 2 laptops attached.
    Have put one 320gig hard drive in so far, and expect 500g or 1t drives to be the same price ($A160) by the time I need more storage.
    We call it the toaster (because of its apperance not any heat generated) and have found it to be reliable if a bit slow.
    I have not been able to find any utilities to manage it at all. I belong to the school that defragments at least monthly.
    Have had no issues.

    Data Corruption Anonymous -- 10/11/05

    It seems to have a remarkable ability to corrupt files (ie. word, execel and powerpoint files) ...........even I had upgraded my SC101 with the latest firmware and software.. it didn't make any different to me.

    Hopefully the next firmware should fix this problems.

    RE Anonymous -- 04/10/06 (in reply to #120123107)

    IS that only your unit or is it a common problem

    Data Corruption Alfredo -- 28/10/06 (in reply to #320070048)

    It seem to be a commom problem. I have a mirror raid on the unit and I lost one of my drives and when I try to rebuild the raid all my OFFICE files were corrupted. It was a nigtmare. I had to buy a recovery software and still didn't get all my files back.

    no so bad Anonymous -- 11/12/05

    Maybe you should try other harddisks? I have it working for 1 month now without any troubles

    SC101 Anonymous -- 29/04/06

    Installed with no probs.
    A bit slow on streaming transfers, but ideal as a network archive device for data storage.

    NETGEAR NAS SC101 John Chapman -- 21/05/06

    Yes, it is a breeze to set up automatically (I used two Maxtor Plus 9 80GB drives which were on the recommended list, cost £134 complete Dabs.com) going on-line for the latest software updates prior to intallation. I set up full single partition (76GB) as Raid(1) for auto backup. The network was 1 cabled PC, 2 WiFi PCs and two WiFi laptops through a Netgear ADSL router.
    Good: it all worked out of the box.
    Bad: data transfer speeds were all over the place regardless of numbers of clients accessing the network - sometimes at crawling speed. Best speed was akin to accessing other clients on the network. Worse was the random corruption of the mainly MSWord files used. Sometimes this was formatting changes but also unreadable squares. For a Solicitors office this was unacceptable so it was back to using the cabled PC shared documents as the "server" which had been relatively quick and totally reliable with DVD backup.
    I now have the NAS on my network with similar clients but different (older) Netgear ADSL router keeping backups with no discernable corruption to date so who knows what the problem was (or still may be)?
    For home use where the odd corrupted file may not be a problem this is a brilliant piece of kit with huge storage potential at reasonable cost.

    Netgear SC101 Anonymous -- 30/07/06 (in reply to #120134747)

    I've a SC101 for about 2 months now, on a D-link ADSL-modem/router, 4 WiFi pc's and 3 cabled pc's. 1 WD200 does the job. It took several re-installs on all of the pc's before evertything worked +/- stable. Transfers are slow, but till now reliable.

    One of the cabled pc's was switched to Kubuntu6. The network is recognized an dused, but the SC101 is not recognized, and "they" say they are working on Linux-drivers.

    For it's price, is a pleasure to have it added to the network. For the install's, it's a pain in the neck for the father who does all that. For Linux, it's a pity, since Kubuntu6 is promising.

    File Reversion David -- 05/04/07

    I used it fine for nearly a year with no problems. However, when I upgraded form windows home to pro, the netgear jumped back a whole month in terms of what files were there and where they were (ex. some files that I had delete reappeared and some files I had added were gone). Customer support told me to do some fancy shutdown procedures, but so far this has not recovered the data on my drives. I am however RAIDing 2 250GB drives and Netgear support told me this should never happen if I span the drives.

    Netgear SC101 Anonymous -- 26/06/07

    I have used the NAS for about 6 months now without any problems, until the power went out. I rebooted everything and it seemed ok at first. I wanted to look at a file and couldn't find my drives. I did a lot of different things and read a lot of different tries on Netgears site. Nothing. I finally got the computer to see the NAS, but the NAS dropped my partitions and wanted to format the drives and create new ones. So now I am on the hunt for someone or something to help me get my data back. After I get it back I will tie a rope to it and use it as a boat anchor.

    sc101 john dobridge -- 17/08/07

    how ironic that the very devise i purchased to protect my files has crashed my laptop and may cause the loss of two years work and digital photos. calls and emails to netgear have fallen on deaf ears. this product should never have been released for public consumption. anyone who buys the sc101 is risking all of their data and their computer. i will never buy another netgear product

    Netgear sc101 Anonymous -- 06/09/07

    Our Netgear SC101 has been working well for about a year. Then when the content grew over 8000 files (only 5 GB) it started to trash our Office files. One then two now almost ever time we open a file. Moving off immediately. Is it a Windows/Netgear thing or just Netgear? Have not seen this with the drives (WD's) so only Netgear appears to be the problem. Too bad. It was working so well. Might try to do 4 GB partitions and assign one to each primary folder. Maybe instead I will use thumb drives.

    Piece of SHITE! Anonymous -- 19/10/07

    Don't look here, the sc101 is the biggest piece of shite to touch computing, well almost, needless to say I have upgraded all firmware, drivers etc and still cannot see the second drive. It reports it but I cant attach it, this has been going on for 2 weeks now, Should have just installed them in the computer in the first place, cheaper and easier to look after

    Netgear SC101 Milton Hey -- 27/10/09

    I have been using this device as last line back up successfully for just over two years. Now the device has crashed. The two mirrored hard drives seem to be ok but I can not not access the data via a Windows PC I tried installing the drives in a similar IDE device but that just wants to reformat the drives. Anyone know a sure way to get the data back.

Add your opinion

Reviews by category

Latest Videos

Sponsored content

Power Centre - Content from our premier sponsors

Blogs

  • David Braue Forget the NBN, 100Mbps is already here
    Telstra and TransACT will shortly begin offering 100Mbps broadband to many customers. By moving early, the companies have not only raised the bar for Australia's broadband services, but thrown down a challenge to a government that now faces increased pressure to deliver the NBN as promised.
  • Array IT: Govt's cost-cutting bitch
    The government needs to stop looking at IT as a necessary evil or the place to remove costs when the Treasurer comes calling.
  • Array Can complaints on mobile content be cut?
    On 1 July this year the new Mobile Premium Services Code was introduced. It sounds like it's had a good impact, but is it enough?
  • More blogs »

Tags

Back to top

Featured