Epson Stylus Photo RX510

By Calvin Siew, Special to ZDNet
01 December 2003 09:40 AM
Tags: rx510, printer, scanner, mfd, epson, photo, stylus, aio
Epson Stylus Photo RX510 The Epson RX510 adds a film scanner to the standard home multifunction capabilities, all at an affordable price.

The Stylus Photo RX510 is an unusual All-In-One (AIO) as it's pitched as a photo studio. While lacking any sort of fax capability, it's also the first AIO to offer support for the scanning of slides and films. With a sticker price of AU$599, the RX510 looks like the most affordable way for users to obtain a complete home mini lab.

According to Epson, a group of users will soon be moving from an analog to a digital platform. For them, abandoning film altogether--with any old negatives that they have--may be a scary proposition. Hence, the RX510 was designed to allow them to digitize their current works while also allowing them to wet their feet in digicam waters. A basic photo editing software (ArcSoft PhotoImpression) is also included to help with these tasks.

In design, the RX510 doesn't wander too far from its elder brethren, the CX5100. Besides the darker greyish guise and the addition of a numeric pad, you'll be hard-pressed to find any difference externally. Delving further though, you'll discover that the RX510 does not feature the Japanese firm's DURABrite (pigment inks) technology, opting instead for a dye-based solution for a larger colour gamut--allowing better looking photos. Even though these inks will not last as long as its DURABrite associates, according to Epson, they resist smudges, water discoloration, and offer long lightfastness (prevents fading) when used in combination with the manufacturer's premium glossy photo media.

Setting up the RX510 is a breeze--if a little time consuming. Included is a startup guide detailing steps and instructions that are easy to follow. However, the full software installation took a rather lengthy 20 minutes. If you do not need the complete package, it's recommended that you pick only the programs you require, saving you valuable time.

The machine flips open like a music box from just below the scanner bed to reveal a spacious interior. You'll find ample room to work with when replacing or installing the INKdividual cartridges. The INKdividual system has a separate cartridge for each colour ink, so you don't have to spend replacing all the inks when only one is empty.

With printers, USB cables are usually attached to the rear. The RX510, on the other hand, sports a peculiar spin. The cable lines the left edge of the unit and connects to a port hidden beneath the top cover. To access it, you'll have to pop open the machine. Granted, this will prevent the capable from accidentally getting dislodged. It also means you won't be able to reuse your USB cable on other devices as easily.

Whether you're planning to scan, print, or copy, operating the RX510 is easy. On the front panel, clearly labelled buttons give users one-touch access to scan, copy, and photo print. On the front lip of the controls, you'll be able to find the 7-in-1 memory card reader protected by a plastic cover to prevent dust.

The RX510 produced respectable scores in our speed tests and with reasonable quality. This printer finished our 10-page test in 86 seconds or approximately 7 pages per minute. This puts the unit on par with mid-range dedicated photo printers such as Canon's i470D. For "borderless" A4-sized photo outputs, the RX510 manages to keep up with Canon's speedy MP730, churning out prints in 5.2 minutes.

With regard to quality, the results were mixed. Text came out very slightly blotchy and were only legible to 3pts font size. For photos, however, the prints turned out great with little visible dithering and no banding. Even prints on plain paper managed to impress.

The scanner and copier of the RX510 did very well with regard to colour fidelity--although the colours were not always matching. This AIO did not produce noticeably washed-out colours when copying. The copy still pales in comparison with the original, but nonetheless, it looks great on its own.

Like most AIOs that arrive without an automatic document feeder (ADF), copy speeds will never be decently quick. It took slightly more than 20 seconds to copy one monochrome sheet. Expectedly, copies of photos took longer needing about 6 minutes for high-quality prints.

Unlike typical film holders, the one found on the RX510 doesn't attempt to snap onto the slides. Instead, the holder attaches to the face of the scanner and the slides drop in easily. The scanner program has various filters, including the useful dust removal function. These worked reasonably well, with the exception of the grain reduction algorithm. On our scans, grains were still noticeable even with the settings set to high.

In all, we were pleased with the RX510's reasonable speed and quality. If faxing is not on your list of requirements, the RX510 should prove a compelling buy, especially if you're a photography buff. With the flexibility to print and process both silver halide and digital film, this multitalented machine has just about covered all the bases.

Epson Stylus Photo RX510
Company: Epson Australia
Price: AU$599
Distributor: Selected resellers
Phone: 1300 361 054

Advertisement

Talkback 13 comments

    I am very content with my purc ...Anonymous -- 06/03/04

    I am very content with my purchase of the RX510, although Ink cartridges are still hard to find ! I think it's a very good value purchase. Also, there is no settings for Semi-gloss Epson paper ! I have been using the Premium gloss setting.

    Where can I get settings to use for other papers such as Ilford ?

    Tks
    jc

    Ink Cartridges Anonymous -- 15/08/09 (in reply to #120103460)

    We have always been able to get inks for our printer at OfficeWorks - can get a discount there if you are a student I think - in Melbourne (your regional /capital city probably) or NewsPrint Newsagency in our local little (pop. 3000) town. I wonder where you have been searching . . .

    I have a great number of black ...Anonymous -- 20/03/04

    I have a great number of black and white box brownie negatives that I want to scan Can the Epson Stylus Photo RX510 do this?

    I have had my RX510 for about ...Anonymous -- 24/07/04

    I have had my RX510 for about two months and have nothing but praise for the speed and quality of this machine. I have had many printers in my life and this is by far the best. All round I give it 9/10.

    The printer is great, but when ...Anonymous -- 16/08/04

    The printer is great, but when it comes time to do a photo, it seems to be pushing through too much ink. The ink just seems to form into blobs, and you get a bad quality print.
    I've tried aligning the heads, and doing nozzle checks, etc.
    And it does it on several quality papers as well.
    Tried glossy, semi-glossy, and plain, and still get the same result.

    Any suggestions would be appreciated.

    I bought my RX510 in July, and ...Anonymous -- 02/10/04

    I bought my RX510 in July, and four months later can say that I am very happy with it.

    I’m one of these die-hards who is not convinced digital is the way to go for my family photographs — I want something a little more permanent than computer software presently is —but do want the ability to print and email photos.

    I use slide file (that is, “positive” film) and well as the more common negative film. I have found the results from slide film are just fantastic. The resulting prints have been far better than some of the traditional “wet” process prints I’ve had produced from slides by so-called professional labs. Eye popping colour with deep tones and vivid hues. The detail is good.When I say good, from an image that is 3.5 cm at its biggest, I can get a digital file that I can zoom in to make out individual threads and button holes on my little boys shirt. I reckon that’s pretty good!

    The unit has a fluorescent light in the lid, revealed when taking the white copy mat out of the lid. It looks big enough to scan medium-format negatives, but the supplied holder is not big enough for them. I think its main function is to just keep negatives straight, and in line with the light, so presumably bigger negatives could be just put onto the glass. Dust has proven to be a problem, but that’s always the case in photography. A small speck that I miss with the eye shows up as a large chip on a scanned image — even with the dust removal function on. Grain removal also doesn’t seem to make a big difference, and using 400 ISO film results in visible grain when zooming in. 100 ISO film gives sharper results, but not visibly so when printing only up to A4. This will only be an issue if you scan on the RX510 and print on another machine at A3 or bigger.

    As many reviews note, prints are just a little softer than the original. I don’t know if this softness is a function of the scanner, or the printer. Scans from negatives are good, with a little more variation in colour and not the same brilliance that I have obtained from slides. I guess it’s because the computer doesn’t have to invert the colours. If it really bugged me enough I could buy Silver Fast (www.silverfast.com) , a software package that comes with precise scanning colour algorithms for the most common negative films on the market.

    There are a few little niggles I have had. The software packages are adequate, but lack any detailed manuals. The on-line manuals are sparse and lacking in detail. If using any of them on Advanced mode, it is up to you to figure out what the differing settings are intended to achieve. I’m referring to ‘Unsharp mask filter’; ‘Grain Reduction’; ‘Colour Restoration’; and ‘Dust Removal’. Each has a ‘high’, ‘medium’ or ‘low’ setting available, but no documentation as to what each level is achieving. Those of you who are experienced with scanners will probably roll your eyes, but this is my first scanner. No, I’m no Luddite — I’m fairly tech savvy, but have never had a need for a scanner previously, and have bought this one primarily because home scanners are now sufficiently capable to resolve film into digital files.

    There is also nothing to explain what function each package is intended to perform, and although some are fairly self-evidence, others seem to cover the same functions, with no discussion as to why or when one is preferable.

    I also have trouble setting the scan size for film. The default setting is 35.3 mm x 22.6 mm. But, a normal 35 mm film frame is actually 36 mm x 24 mm. Not a huge difference maybe, but using an SLR camera means some of my shots are very tightly framed. In some cases this has meant scans using the default settings have cut off half a head! They can be manually changed, but despite a ‘lock’ button, do not stay set, and can only be set for a single frame at a time, whereas the default setting will apply for scanning up to six frames at a time.

    Surprisingly, the available settings for paper types do not cover a

    Can I print directly onto CDR ...Anonymous -- 11/02/05

    Can I print directly onto CDR using the RX510

    Epson not compatible with Micr ...Anonymous -- 11/03/05

    Epson not compatible with Microsoft applications! This is what I was told today by two Epson tecnicians. I bought my daughter, (who is a Uni student) an RX510 for Christmas. She does a lot of ****isgnments which include photographs. The photographs when printed from Microsoft Word are VERY DARK and VERY SATURATED which of course makes the photos VERY UNACCEPTABLE. I am an experienced photographer/digital photographer and I printed my own proven photos, (my printer and lab printed) on the RX510. I tried printing with numerous settings, alas the same result VERY DARK, VERY SATURATED and VERY UNACCEPTABLE. I rang Epson twice and was told by both technicians that the RX510 is not compatible with Microsoft applications because Microsoft changed their colour management (???). Needless to say I am very unhappy and I have a very disappointed daughter.

    Epson not compatible with Micr ...Anonymous -- 11/03/05

    Epson not compatible with Microsoft applications! This is what I was told today by two Epson tecnicians. I bought my daughter, (who is a Uni student) an RX510 for Christmas. She does a lot of ****ignments which include photographs. The photographs when printed from Microsoft Word are VERY DARK and VERY SATURATED which of course makes the photos VERY UNACCEPTABLE. I am an experienced photographer/digital photographer and I printed my own proven photos, (my printer and lab printed) on the RX510. I tried printing with numerous settings, alas the same result VERY DARK, VERY SATURATED and VERY UNACCEPTABLE. I rang Epson twice and was told by both technicians that the RX510 is not compatible with Microsoft applications because Microsoft changed their colour management (???). Needless to say I am very unhappy and I have a very disappointed daughter.

    I have also experienced the da ...Anonymous -- 13/06/05

    I have also experienced the dark and saturated photos when using the RX510 and Microsoft products (XP directly, Word, etc). How do I print photos with an acceptable quality from this printer? Like a previous person I am currently disappointed after the money I have spent on it.

    Ian

    I have had this machine since ...Anonymous -- 12/07/05

    I have had this machine since November 2004.
    My continuing frustration is that once one of the ink cartridges is empty the whole machine locks down and even if it is a coloured cart., I can't continue to print with just the black.
    Very annoying......and costly.......

    avoid avoid avoid Anonymous -- 21/10/08

    the epson rx510 has a lot of trouble printing the correct pages in a multipage document. e.g. when it is supposed to print all pages, it prints all but the last one. very annoying. also it wastes ink by preparing to print with all colours even when only one colour is used.

    Quality of printing Anonymous -- 15/08/09

    We bought an RX510 approximately 10 years ago. The printer we had prior to it lasted only a couple of years and was quite disappointing. The Epson has seen our 4 kids through school - projects and the like and by and large, we have been happy with the quality of printing. It has only been in the last eight months that we noticed that when we printed photos, they were dark even when we made adjustments. Our printer has now reached a point where it needs a service yet it still performs adequately and I am able to use it in my business for any correspondence and invoicing.

Add your opinion

Reviews by category

Sponsored content

Power Centre - Content from our premier sponsors

Blogs

  • Suzanne Tindal Sick of broken tender sites
    Some of the state governments desperately need to invest in more user-friendly tender sites so that looking for information on government tenders doesn't have to be a game of blind man's bluff.
  • Array Cyberwar: What is it good for?
    In this week's episode, Cyberwar. What is Australia's place in the world of digital warfare? What are the implications for the NBN?
  • Array Is wholesale-only backhaul just a pipedream?
    The potential acquisition of Pipe Networks by SP Telemedia has raised the question about whether vertically integrated backhaul providers will mean higher wholesale prices for ISP customers.
  • More blogs »

Tags

Back to top

Featured