CNC Code Shooter 2.5.2

CNC Machine G-code generator for lathes & mills, added automatic code generation for dimensional patterns, angles and arcs, New send and recieve, Now with limited engraving, set radius and feed rate, tool nose radius, corner or fillet radius, set clockwise or counterclockwise, set drill depth and feed rate, add G-codes and M-codes, set threads per inch, set up sheet, V thread or Acme, set rapid, set feed, add new tool, set spindle speed, forward or reverse, G76, choose a straight or tapered thread, x, z rapid to position, x start thread diameter, depth of cut, threads per inch, G92, set major or minor diameter, set min. and max cut, straight or tapered thread, Face, set x, z start and finish, set depth of cut, retract after cut amount, feed rate, 1 or 2 line G72, G70, Groove, groove width, closest edge to face, radius at top, radius at bottom, part and groove diameter, Mic Over Balls,set angle off of face, ball diameter, ID or OD, turn, x, z rapid, depth of cut, retract amount, x, z leave amount, bore, 1 or 2 line G71, feed rate, angle, choose angle or chamfer, first start z, diameter of angle at face, tool nose radius, set line numbers or renumber, preview your code as you create it before sending it to the text editor, preview your finished program in the text editor before sending it to the machine, send your program to your machine.

CNET Networks is not responsible for the content of this Publisher's Description. We encourage you to determine whether this product or your intended use is legal. We do not encourage or condone the use of any software in violation of applicable laws. Any questions, complaints or claims related to any specific download should be directed to the relevant vendor.